TEL: +86-576-87442811
Weibo
Weibo
Weibo
| Rubber has valuable elastic polymer materials, a wide range of temperatures and in different media give less stress will produce larger deformation, the deformation can provide the contact pressure to compensate the leak gap, achieve the purpose of sealing. If the storage is not good, it will affect the effect of sealing. clean According to the need, can use soapy water to clean the seal. Disinfectants, organic solvents, and sharp tools should not be used. After cleaning the seal should be dry at room temperature, can not be close to the heat source. The environment of the rubber seal should be kept clean. temperature 5 to 25 degrees Celsius is the ideal storage temperature, should not be higher than 25. Should avoid contact with heat source and sunlight. To remove from the low temperature storage state of the rubber sealing ring, should be placed in room temperature for more than 10 minutes, and then use the. humidity The relative humidity of the warehouse shall be less than 70%. To avoid too wet or too dry, do not appear condensation phenomenon. Illumination Rubber seals should avoid light storage, especially to avoid the strong sunlight and ultraviolet irradiation. Ultraviolet proof packaging bag can provide the best protection. Suggest a red or orange paint or plaster on the window of the warehouse. Packing Rubber sealing ring must not be in contact with the solvent, oil, magnetic materials will damage the rubber material. PVC material can not be used to seal the seal. Seals of different materials shall not be mixed together. There are a few points to be added: Radiation: avoid ionizing radiation on the rubber sealing ring damage. Oxygen and ozone: rubber material should avoid exposure to circulating air. The purpose can be achieved by packing, winding, storing in an airtight container or other suitable means. In the storage space, there should not be capable of generating ozone equipment, such as mercury vapor lamp, easy to produce electric spark or static electricity high-voltage electrical appliances, motor. Deformation: the rubber sealing ring should be may be placed in the free relaxation state and avoid under tension, compression and other deformation, such as not suitable for hanging, stacked and. Storage period: the seal rubber retention period is made of rubber material to determine the type of the. |
| Back |
QQ:2178637284
Mobile: 18957675091
